← All articles

Article

Before Battery Installation

Prepare for a home battery by choosing a compliant location, checking clearances and cable routes, and planning essential backup circuits.

Prepare to Install Batteries

Confirm your battery installation location

Contact Us

Solar batteries must comply with AS/NZS 5139:2019, which restricts installation in habitable rooms and other unsafe areas such as ceiling spaces, wall cavities, under stairs, and escape routes. If the battery is mounted on a wall that backs onto a habitable room, a non-combustible fire barrier (such as brick, concrete, or fibre-cement sheeting) is required. In the meantime, the installer needs to understand the distance between your meterbox, sub-switchboard, and battery for measuring the cable running length.

Best Way To Demonstrate
  1. Confirm installation location (indoor or outdoor) with photos (Fig.1 indoor /Fig.2 outdoor).
  2. Record a short video showing the distance from the meter box to the installation spot. (Video Guide)

Environment

Garage Installation (Indoor)

✅ Maintain at least 200-500mm clearance on all sides for ventilation and safety.

✅ Use a clean and clutter-free area for easy maintenance.

✅ Install a safety bollard (optional but recommended) to protect the unit from vehicles.

✅ Use proper wall mounts or supports if needed for neat installation.

Outdoor Installation​

✅ Install a sun-protective canopy or awning to shield the unit from sunlight and rain (mandatory).

✅ Ensure the battery compartment has a protective cover to prevent exposure to direct sunlight, rain, and debris, which could affect performance and safety.

✅ Ensure a proper cement base is prepared (avoid grass, gravel, wood, or bricks).

✅ Keep at least 200-500mm clearance on all sides for ventilation and access.

✅ Use wall mounts or brackets if installing against a wall.

HOW TO DECIDE?

  • Outdoor: Avoid direct sun: use shade or an awning.
  • Garage: Leave parking space protective bollard included.
  • Clearance & Ground: Must meet regulations; firewall may be needed against house walls

Maintain Safe Distance

Indoor and outdoor battery installation diagrams showing required clearances, a canopy and a concrete base

The battery system must be installed at a safe distance from any windows or ventilation openings connected to habitable rooms. Specifically, it should not be placed within 200-500mm horizontally or 200-500mm vertically below these openings in outdoor setups. These clearances are necessary to reduce the risk of fire, gas leakage, or heat affecting the safety and comfort of occupied areas inside the building. Maintaining these minimum distances helps ensure both proper ventilation and safe system performance.

Power Backup

Power backup infographic contrasting essential household loads with high-power appliances to avoid
  • All installations include essential backup, typically covering lights, Wi-Fi, fridge, garage door, and some outlets.
  • High-power appliances (hot water, split Ac, dishwasher, etc.) are not included by default due to high surge demand, which may cause trips or instability.
  • For whole-home backup, please notify your installer in advance for feasibility assessment.