Your setup · 3 × BAT 6.0 · 18 kWh usable
Batteries / Sigenergy
Home battery
Sigenergy SigenStor
Solar, storage and EV charging in one AI-managed stack, with 6 kWh modules from 6 to 36 kWh.
- 6–36 kWhCapacity range
- 5-in-1Integrated system
- IP66Indoors or outside
- 10 yearsProduct warranty
Solar, storage and EV charging in one AI-managed stack, with 9 kWh modules from 9 to 54 kWh.
- 9–54 kWhCapacity range
- 5-in-1Integrated system
- IP66Indoors or outside
- 10 yearsProduct warranty
Scroll to see how it works
5-in-1
One stack does five jobs
SigenStor puts a solar inverter, battery PCS, battery storage, an energy management system and an EV DC charger into one platform.
- Solar inverter
- Battery PCS
- Battery storage
- Energy management
- EV DC charger
Inverter ratings and phase options are on the Sigenergy inverter page.
Modular
Start with what you need. Add modules later.
Each Energy Controller takes one to six battery modules. BAT 6.0 gives 6 kWh usable per module, so a system runs from 6 to 36 kWh.
Every module has its own battery optimiser. Modules are managed independently, which makes a later expansion simpler.
Each Energy Controller takes one to six battery modules. BAT 10.0 gives 9 kWh usable per module, so a system runs from 9 to 54 kWh.
Every module has its own battery optimiser. Modules are managed independently, which makes a later expansion simpler.
Safety
Protection in every layer
LiFePO₄ battery chemistry, five-layer battery safety protection and an IP66-rated enclosure, so the system can go indoors or outside.
The modules stack with quick-connect fittings, which keeps installation simple and the finished unit compact.
Sigen AI
It manages the energy. You check the app.
Sigen AI balances solar generation, battery storage and household use through the day. The mySigen app shows energy flow, solar generation, battery status and consumption.
Recommended systems
What we install
| Energy Controller | Single-phase: Sigen Energy Controller 5.0 / 8.0 / 10.0 SP Three-phase: Sigen Energy Controller 15.0 / 20.0 / 25.0 / 30.0 TP |
|---|---|
| Battery module | BAT 6.0: 6 kWh usable (6.02 kWh module) |
| Expansion | 1 to 6 modules per controller |
| Dimensions | 767 / 270 / 265 mm (W / H / D) |
| IP rating | IP66 |
| Warranty | 10 years |
| Energy Controller | Single-phase: Sigen Energy Controller 5.0 / 8.0 / 10.0 SP Three-phase: Sigen Energy Controller 15.0 / 20.0 / 25.0 / 30.0 TP |
|---|---|
| Battery module | BAT 10.0: 9 kWh usable (9.04 kWh module) |
| Expansion | 1 to 6 modules per controller |
| Dimensions | 767 / 270 / 265 mm (W / H / D) |
| IP rating | IP66 |
| Warranty | 10 years |
Specifications and warranty terms are as the manufacturer publishes them and can change. Your quote and contract confirm the exact equipment, configuration and warranty for your home.
Other batteries we install
How the rebate estimate works
The federal Cheaper Home Batteries Program pays through STCs. Usable capacity counts in three tiers: the first 14 kWh in full, the next 14 kWh at 60% and the next 22 kWh at 15%, up to 50 kWh. That figure is multiplied by a factor that steps down every six months: 6.8 for installs from 1 May to 31 December 2026, then 5.7 from 1 January 2027. Batteries under 5 kWh usable are not eligible.
Estimate only. The final rebate depends on install date, the battery's CEC-listed usable capacity, approved equipment, accredited installation, solar eligibility and the STC price at the time. Your quote will confirm the exact amount.