Your system · 28 × LONGi · 13.30 kW · Sungrow SGR-SH10RS
Solutions / Residential
Residential solar
13.30 kW solar system
For four to six people in a larger home with ducted air conditioning, a pool and one electric vehicle, using about 28 to 40 kWh a day.
- 28–30Panels
- 55–56 kWhA day, averaged over the year
- ≈ 72 m²Clear roof needed
- 91 STCsBrisbane, about $3,549
Scroll to see how it works
Who it's for
The crossover size
It suits four to six people in a larger home: typically a four- or five-bedroom house with ducted air conditioning, a pool and one electric vehicle charging at home. As a sizing guide we match it to households using roughly 28 to 40 kWh a day, the band directly above a 10.45 kW system.
Your own bill decides it. This is the crossover size: it can go on a single-phase or a three-phase connection.
What it generates
About 55 kWh on an average day
On South East Queensland assumptions the system generates roughly 55 to 56 kWh a day averaged across the year, or about 20,200 to 20,400 kWh a year, twice the annual output of a 6.65 kW system.
At this scale, when you use the energy matters more than how much. A household that heats water, runs a pool and charges a vehicle in daylight uses far more of it than one that does all three overnight.
Output estimate assumptions
- 5.2 peak sun hours a day, the annual average for South East Queensland
- Performance ratio 0.80 for inverter, cable, temperature and soiling losses
- About 4.2 kWh per installed kW per day
- An unshaded, north-facing array at or near optimum tilt
Roof space
Plan on about 72 m² of clear roof
28 or 30 panels of close to 2 m² each cover roughly 57 to 60 m². Add about 20 per cent for row spacing, edge clearances and access.
Few Brisbane roofs offer that on one face, so the panels are commonly spread across two or three orientations. Splitting east and west flattens the generation curve, which often suits early-morning and evening use better than one north-facing block.
Standard installation
What the price covers
- Single- or two-storey house, up to 6 metres high
- Tin or tile roof
- Single-phase or three-phase meter
- Homes across QLD, VIC and NSW
Anything outside that list is quoted separately.
Equipment
Three panels, four inverters, one 10 kW class
| Panel | Panels | System |
|---|---|---|
| Jinko Tiger Neo 54HL4R-BDV | 30 | 13.20 kW |
| LONGi Hi-MO X10 LR7-54HVH | 28 | 13.30 kW |
| JA Solar DeepBlue 4.0 Pro JAM54D41 | 30 | 13.20 kW |
Twelve panel-and-inverter combinations are offered, all built around a 10 kW class inverter.
Inverter options: Sungrow SGR-SH10RS, SolaX X1-SMT-10K-G2, GoodWe GW9.99K-EHB-AU-G11, Fronius Symo.
Other package sizes
Certificate figures are for Brisbane.
How the certificates work
A standard installation at this size creates 91 small-scale technology certificates in Brisbane, about $3,549, and 78 in Melbourne, about $3,042, at $39 a certificate. The count depends on the postcode's deeming zone as well as the system size.
The count falls each year as the deeming period steps down, and the certificate price moves on its own, so treat both as a snapshot. Certificates are normally assigned to the installer and taken off the up-front price; your quote confirms how they apply.