NHomes it's sized for18–28kWh a dayThis system makes42–44kWh a day010203040506 AM9 AMNOON3 PM6 PM29.4 kWhSO FAR TODAY · 1:30 PM≈ 44–46 m² of panelsPlan on ≈ 55 m² of clear roofPANEL AREA + 20% FOR SPACING AND ACCESS22 × LONGi LR5-54HPH-415MSungrow SGR-SH8.0RS

Your system · 22 × LONGi · 10.45 kW · Sungrow SGR-SH8.0RS

Solutions / Residential

Residential solar

10.45 kW solar system

For three to five people in a three- or four-bedroom home using about 18 to 28 kWh a day.

  • 22–23Panels
  • 42–44 kWhA day, averaged over the year
  • ≈ 55 m²Clear roof needed
  • 72 STCsBrisbane, about $2,808

Scroll to see how it works

Who it's for

The step up from 6.65 kW

It is the size most families move to once ducted or multi-head air conditioning, a dishwasher, a pool pump or an electric vehicle enters the picture. As a sizing guide we match it to homes using roughly 18 to 28 kWh a day.

That band is a guide drawn from typical household use. Your own bill decides it. This size is configured for a single-phase connection.

What it generates

About 43 kWh on an average day

On South East Queensland assumptions the system generates roughly 42 to 44 kWh a day averaged across the year, or about 15,500 to 16,000 kWh a year, around 1.5 times a 6.65 kW system. These are modelled averages for comparing sizes, not guaranteed output.

More of the output is exported at this size. Run the pool pump, hot water or car charging in the middle of the day, or add a battery, and more of it stays on your side of the meter.

Output estimate assumptions
  • 5.2 peak sun hours a day, the annual average for South East Queensland
  • Performance ratio 0.80 for inverter, cable, temperature and soiling losses
  • About 4.2 kWh per installed kW per day
  • An unshaded, north-facing array at or near optimum tilt

Roof space

Plan on about 55 m² of clear roof

22 or 23 panels of close to 2 m² each cover roughly 44 to 46 m². Add about 20 per cent for row spacing, edge clearances and access.

At this size the panels often split across two roof faces, which the inverter's separate MPPT inputs are designed to handle.

Standard installation

What the price covers

  • Single- or two-storey house, up to 6 metres high
  • Tin or tile roof
  • Single-phase or three-phase meter
  • Homes across QLD, VIC and NSW

Anything outside that list is quoted separately.

Equipment

Three panels, four inverters, one 8 kW size

PanelPanelsSystem
Jinko Tiger Neo 54HL4R-BDV2310.12 kW
LONGi LR5-54HPH-415M2210.45 kW
JA Solar DeepBlue 4.0 Pro JAM54D412210.12 kW

Twelve panel-and-inverter combinations are offered, all built around an 8 kW inverter.

Inverter options: Sungrow SGR-SH8.0RS, SolaX X1-SMT-8K-G2, GoodWe GW8000-ET-20, Fronius Symo.

Other package sizes

6.65 kW14 panels45 STCs · $1,755 Brisbane13.30 kW28 panels91 STCs · $3,549 Brisbane19.95 kW42 panels137 STCs · $5,343 Brisbane

Certificate figures are for Brisbane.

How the certificates work

A standard installation at this size creates 72 small-scale technology certificates in Brisbane, about $2,808, and 61 in Melbourne, about $2,379, at $39 a certificate. The count depends on the postcode's deeming zone as well as the system size.

The count falls each year as the deeming period steps down, and the certificate price moves on its own, so treat both as a snapshot. Certificates are normally assigned to the installer and taken off the up-front price; your quote confirms how they apply.

LONGI-SUNGROW (2)

Automatically extracted image text: SUNGROW Clean power for all LONGI 10.45kW Residential Solar Sytem Fully Installed (Standard Installation* *Standard Installation included and Limited to 1. Single - story or two - story house (up to 6 meters high) 2. Tin or Tile roof 3. Single - phase and three - phase meter 4. Total of 83 STCs (Apron. Value $3,320) 5. Proudly serving customers throughout QLD, VIC, and NSW. 6. SUNGROW (SGR-SH8.0RS) inverter*1 and LONGi (LR5-54HPH-415M)*22