Your system · 14 × LONGi · 6.65 kW · Sungrow SGR-SH6.0RS-ADA
Solutions / Residential
Residential solar
6.65 kW solar system
The usual starting point for a Brisbane home: one to three people in a two- or three-bedroom house using about 10 to 18 kWh a day.
- 14–15Panels
- ≈ 28 kWhA day, averaged over the year
- ≈ 35 m²Clear roof needed
- 45 STCsBrisbane, about $1,755
Scroll to see how it works
Who it's for
The usual starting point
It suits one to three people in a two- or three-bedroom house: a couple, a small family, or a household where most people are out during the day. As a sizing guide we match it to homes using roughly 10 to 18 kWh a day: split-system air conditioning, an electric hot water service and ordinary appliances, but no pool and no electric vehicle.
That band is a guide drawn from typical household use. Your own bill decides it. Every combination at this size is configured for a single-phase connection.
What it generates
About 28 kWh on an average day
On South East Queensland assumptions the system generates roughly 28 kWh a day averaged across the year, or about 10,100 to 10,200 kWh a year. Clear summer days run well above that and overcast winter days well below it.
That is more than the household band above, because solar peaks in the middle of the day while most use falls in the morning and evening. Some is always exported unless you move load into daylight hours or add a battery.
Output estimate assumptions
- 5.2 peak sun hours a day, the annual average for South East Queensland
- Performance ratio 0.80 for inverter, cable, temperature and soiling losses
- About 4.2 kWh per installed kW per day
- An unshaded, north-facing array at or near optimum tilt
Roof space
Plan on about 35 m² of clear roof
14 or 15 panels of close to 2 m² each cover roughly 29 to 30 m². Row spacing, edge clearances and access paths add around 20 per cent.
That is a planning allowance, not a fixed rule. The final layout depends on your roof.
Standard installation
What the price covers
- Single- or two-storey house, up to 6 metres high
- Tin or tile roof
- Single-phase or three-phase meter
- Homes across QLD, VIC and NSW
Anything outside that list is quoted separately.
Equipment
Three panels, four inverters
| Panel | Panels | System |
|---|---|---|
| Jinko Tiger Neo 54HL4R-BDV | 15 | 6.60 kW |
| LONGi Hi-MO X10 LR7-54HVH | 14 | 6.65 kW |
| JA Solar DeepBlue 4.0 Pro JAM54D41 | 15 | 6.60 kW |
The panel total is deliberately a little larger than the inverter's AC rating. Panels rarely reach their laboratory rating in the field, so the slight oversizing keeps the inverter in its efficient range for more of the day.
Inverter options: Sungrow SGR-SH6.0RS-ADA, SolaX X1-BOOST-5K-G4, GoodWe GW6000-MS-30, Fronius Symo.
Other package sizes
Certificate figures are for Brisbane.
How the certificates work
A standard installation at this size creates 45 small-scale technology certificates in Brisbane, about $1,755, and 39 in Melbourne, about $1,521, at $39 a certificate. The count depends on the postcode's deeming zone as well as the system size.
The count falls each year as the deeming period steps down, and the certificate price moves on its own, so treat both as a snapshot. Certificates are normally assigned to the installer and taken off the up-front price; your quote confirms how they apply.